4-6.3.3 Super Io Configuration - SOLTEK SL-KT880E-GR Manual

4-6.3.3 Super IO Configuration

Choose "SuperIO Configuration" in "Advanced BIOS Features" and press
<Enter>. The following sub-screen will appear for configuration:
Configure ITE8705 Super IO Chipset
OnBoard Floppy Controller
Serial Port1 Address
Serial Port2 Address
Serial Port2 Mode
OnBoard CIR Port
Parallel Port Address
Parallel Port Mode
Parallel Port IRQ
OnBoard Floppy Controller
Allows you to enable / disable the Onboard Floppy Controller.
Choices: Enabled; Disabled
Serial Port1 Address
Allows you to set the Onboard Serial Port1 Address.
Choices: Disabled; 3F8/IRQ4; 3E8/IRQ4; 2E8/IRQ3;
Serial Port2 Address
Allows you to set the Onboard Serial Port2 Address.
Choices: Disabled; 2F8/IRQ3; 3E8/IRQ4; 2E8/IRQ3;
Serial Port 2 Mode
If Serial Port2 Address is not disabled, it allows you to set the Serial Port 2 Mode.
Choices are:
Standard;
IrDA SIR: Providing 3 items for configuration:
IR Duplex Mode:
Half Duplex; Full Duplex
IR Tx2Rx 40-Bits Delay Sel:
No 40-Bits Delay; Tx 40-Bits Delay
ASK IR: Providing 3 items for configuration:
IR Duplex Mode:
Half Duplex; Full Duplex
IR Tx2Rx 40-Bits Delay Sel:
No 40-Bits Delay; Tx 40-Bits Delay
IR Rx2Tx 40-Bits Delay Sel:
No 40-Bits Delay; Rx 40-Bits Delay
OnBoard CIR Port
Allows you to set the onboard CIR Port.
Choices: Disabled; 2E0; 3E0; 298
CIR Port IRQ
If Onboard CIR Port is not disabled, this item appears to allow you to set the onboard CIR
Port IRQ for 2E0 ,3E0 and 298
Choices for 2E0, 3E0 and 298:
IRQ3; IRQ4; IRQ10; IRQ11
SuperIO Configuration
Enabled
3F8/IRQ4
2F8/IRQ3
Standard
Disabled
378
Normal
IRQ7
61
Chapter 4 BIOS Setup
Help Item