4-6.3.4 Super Io Configuration - SOLTEK 86SP2 Manual

86SP2/86SP2-L

4-6.3.4 Super IO Configuration

Choose "SuperIO Configuration" in "Advanced BIOS Features" and press
<Enter>. The following sub-screen will appear for configuration:
Configure Win627THF Super IO Chipset
OnBoard Floppy Controller
Serial Port1 Address
Serial port2 Address
Serial port2 Mode
OnBoard CIR Port
Parallel Port Address
Parallel Port Mode
Parallel Port IRQ
OnBoard Floppy
Controller
Serial Port1 Address Allows you to set the Onboard Serial Port1 Address.
Serial Port2 Address Allows you to set the Onboard Serial Port2 Address.
Serial Port 2 Mode If Serial Port2 Address is not disabled, it allows you
OnBoard CIR Port Allows you to set the onboard CIR Port.
Parallel Port Address Allows you to configure Parallel Port Address.
SuperIO Configuration
Enabled
3F8/IRQ4
2F8/IRQ3
Normal
Disabled
378
Normal
IRQ7
Allows you to enable / disable the Onboard Floppy
Controller.
Choices: Enabled; Disabled
Choices: Disabled; 3F8/IRQ4; 3E8/IRQ4; 2E8/IRQ3;
Choices: Disabled; 2F8/IRQ3; 3E8/IRQ4; 2E8/
IRQ3;
to set the Serial Port 2 Mode. Choices:
-- Normal;
-- IrDA: Providing 2 items for configuration:
IR I/O Pin Select: SINB/SOUTB; IRRX/IRTX
IR Duplex Mode: Half Duplex; Full Duplex
-- ASK IR: Providing 2 items for configuration:
IR I/O Pin Select: SINB/SOUTB; IRRX/IRTX
IR Duplex Mode: Half Duplex; Full Duplex
Choices: Disabled; 2E0; 3E0
Choices: Disabled; 378; 278; 3BC;
64
Help Item
Allows BIOS to Enable or
Disable Floppy Controller.