Import Configuration - HMS Networks Anybus Wireless Bolt II User Manual

® ™
Anybus Wireless Bolt II

8.2.2. Import Configuration

To configure multiple Bolt II units with the same settings, you can import a configuration file.
Before You Begin
NOTE
Importing a configuration replaces the current applied configuration.
The supported file format is .conf.
Procedure
Figure 52. System page
Import configuration file:
1. On the System page, click Import.
2. In the Import configuration window, click Select file (.conf).
3. In the Open dialog box, browse to and select the configuration file and click Open.
4. In the Import configuration window, click Import.
5. The configuration file is parsed.
• If the configuration is compatible, the settings are imported.
• If any compatibility mismatches occur, a message about the mismatch appears.
6. To apply the settings, click Apply in the web-interface header, and follow the instructions.
Page 52 of 68
Configuration File Handling
SCM-1202-209 Version 1.0