Wireless Bolt Ii Operation Modes - HMS Networks Anybus Wireless Bolt II User Manual

® ™
Anybus Wireless Bolt II

5.4. Wireless Bolt II Operation Modes

Bolt II comes with two Wireless Mode types: Cable replacement and Access Point.
Figure 13. Bolt II Mode page
Cable Replacement
In a cable replacement installation, two Bolt II units are used.
• Cable replacement Device A
Set up one of the Bolt II as an access point in the cable replacement installation.
• Cable replacement Device B
Set up one of the Bolt II as a client in the cable replacement installation.
See also Cable Replacement Mode Setup (page
Access Point
This Mode is selected by default.
Set up the Bolt II as an access point to give other client devices wireless access to an existing Ethernet device or
network.
See also Access Point Mode Setup (page
Page 20 of 68
21).
25).
Wireless Bolt II Operation Modes
SCM-1202-209 Version 1.0