Table of Contents
Advertisement
Connect to Configure
Configure Bolt II Using a Wireless Device
When the Bolt II is set up as an Access point or Cable replacement, Device A unit, you can configure it using a
wireless device.
Figure 7. Configure the Bolt II using a wireless device
On the wireless device:
1.
Connect to the Bolt II SSID (Network name).
2.
To access the Bolt II built-in web interface, enter the Bolt II IP address in a browser.
SCM-1202-209 Version 1.0
®
™
Anybus
Wireless Bolt II
Page 15 of 68
Advertisement
Table of Contents
Related Manuals for HMS Networks Anybus Wireless Bolt II
Related Products for HMS Networks Anybus Wireless Bolt II
- HMS Networks Anybus Communicator ABC4023
- HMS Networks Anybus Wireless Bridge II CAN AWB3016
- HMS Networks Anybus Wireless Bridge II CAN AWB3016-B
- HMS Networks Anybus Wireless Bridge II Serial AWB3005
- HMS Networks Anybus Wireless Bridge II Serial AWB3015
- HMS Networks Anybus Wireless Bolt LTE AWB1504
- HMS Networks Anybus Wireless Bolt LTE AWB1505
- HMS Networks Anybus Wireless Bolt LTE AWB1503-B
Need help?
Do you have a question about the Anybus Wireless Bolt II and is the answer not in the manual?