Access The Built-In Web Interface; Required Ip Address Settings - HMS Networks Anybus Wireless Bolt II User Manual

® ™
Anybus Wireless Bolt II

5.2. Access the Built-In Web Interface

5.2.1. Required IP Address Settings

To be able to access the Bolt II built-in web interface you may need to adjust the IP settings, choose one of the
following methods.
NOTE
The Bolt II default IP address is 192.168.0.97 and the subnet mask is 255.255.255.0.
Option 1- To use DHCP Client
By default, DHCP client is enabled on the Bolt II. Bolt II assigns an IP address to the PC used to configure it.
If the DHCP client is disabled, you need to set a static IP address manually on the PC used to configure the Bolt II.
Option 2 - Set a Static IP Address on Your PC
NOTE
When you change to a static IP address on your PC, internet access is lost.
On the PC accessing the Bolt II built-in web interface, set a static IP address within the same IP address range as
the Bolt II IP address.
Result
Now you can enter the Bolt II IP address in your web browser and search to access the built-in web interface
login page.
See Login to the Built-In Web Interface (page
Page 16 of 68
17).
Access the Built-In Web Interface
SCM-1202-209 Version 1.0