Cable Replacement Device B Settings - HMS Networks Anybus Wireless Bolt II User Manual

® ™
Anybus Wireless Bolt II

5.7.2. Cable Replacement Device B Settings

Ensure that Cable replacement Device B is selected on the Operation mode page.
On the Wireless settings page, configure the Cable replacement Device B settings for the Bolt II client.
Figure 29. Cable replacement Device B page
Client Security Type Settings
Setting
Network name (SSID)
Security type
Passphrase
Page 30 of 68
Value
No default Network name (SSID) is used.
WPA2-Personal
No default Passphrase is used.
Description
Name the Bolt II with a unique Network name (SSID) (Service
Set IDentifier).
Select a security type for the wireless connection is locked to
WPA2-Personal.
Enter the Passphrase, password, for the selected security type.
NOTE
The Passphrase must be a minimum of eight
characters in length.
SCM-1202-209 Version 1.0
Wireless Settings