Table of Contents
Advertisement
®
™
Anybus
Wireless Bolt II
10. Technical Data
10.1. Technical Specifications
Model identification
Communication connector
Power connector
Power supply
Power over Ethernet (PoE)
Power consumption
Antenna
Wireless LAN
Storage temperature
Operating temperature
Humidity
Vibration
Housing material
Protection class
Product weight
Dimensions
Mounting
Additional technical data and information related to the installation and use of this product can be found at
www.anybus.com/support.
Page 68 of 68
AWB6BA
RJ45
3-pole push-in spring connection
Recommended: 12–24 VDC Reverse voltage protection
Min: 10 VDC
Max: 33 VDC
Max power: 2.5 W
IEEE 802.3af/802.3at Type 1 Class 3
Typical: 1.45 W
Max: 2.7 W
Voltage range: 37-57 V
Typical: 60 mA @ 24 V Max: 110 mA @ 24 V
MIMO 802.11 a/b/g/n and 802.11ac
2.4 GHz, channel 1-11 + 12-13 depending on regulatory domain scan
5 GHz Access Point: 36-48 (U-NII-1)
5 GHz Client: 100-116 + 132-140 and 120-128 (U-NII-1, U-NII-2, U-NII-2e) depending on regulatory
domain scan
RF output power: 18 dBm
-40 to +85 °C
-25 to +65 °C
EN 600068-2-78: Damp heat, +40°C, 93% humidity for 4 days.
See datasheet
Plastic (see data sheet for details)
Aluminum (see data sheet for details)
Top (outside of host): IP66 / UL Type 4X
Base (inside of host): IP30
284 g
113 x 59 x 113 mm (W x H x D)
M50 screw and nut. 50.5 mm hole needed.
Technical Data
SCM-1202-209 Version 1.0
Advertisement
Table of Contents
