Access Point Mode Setup
5.6. Access Point Mode Setup
Before You Begin
Use the Bolt II as an access point and give other client devices wireless access to an Ethernet device or network.
Access Point Configuration
Procedure
Figure 22. Connect the Bolt II access point to your PC and to power
1.
Connect the Bolt II to power.
2.
Connect the Bolt II to your PC.
3.
Log in to the Bolt II built-in web interface.
4.
Navigate to the Operation mode page.
5.
Select the Access point Operation mode.
Figure 23. Access point Operation mode
6.
Navigate to the Wireless settings page.
SCM-1202-209 Version 1.0
®
™
Anybus
Wireless Bolt II
Page 25 of 68