Configuration; Before You Begin Configuration; Connecting To Pc And Power - HMS Networks Anybus Wireless Bolt LTE User Manual

® ™

Configuration

Anybus Wireless Bolt LTE
5. Configuration

5.1. Before You Begin Configuration

By default, the Bolt LTE APN Assignment is set to automatically search for the SIM card APN setting and assign it
to the Bolt LTE.
In cases where no additional configuration of the settings in the Bolt LTE built-in web interface is required, see
Setting Up Bolt LTE with Automatic APN Assignment (page 32).

5.2. Connecting to PC and Power

When configuring Bolt LTE it must be connected to a PC.
Figure 7. Connect to PC and Power
1. Connect the Bolt LTE Ethernet port to your PC.
2. Connect the Bolt LTE Power connector to a power supply.
SCM-1202-164 Version 1.2 Page 13 of 60