To Use Dhcp Client - HMS Networks Anybus Wireless Bolt II User Manual

Ethernet Settings

5.8.2. To Use DHCP Client

Figure 33. Ethernet IP Settings, DHCP client enabled
By default, DHCP client is disabled.
To enable DHCP client, select the DHCP client enabled checkbox. The IP settings will be provided by the network
DHCP server.
Table 5. Bolt II default Ethernet IP Settings
Settings
IP address
Subnet mask
Gateway address
Primary DNS
Secondary DNS
SCM-1202-209 Version 1.0
Default value
192.168.0.97
255.255.255.0
0.0.0.0
There is no default Primary DNS.
There is no default Secondary DNS.
® ™
Anybus Wireless Bolt II
Page 35 of 68