Web Server Certificate Settings - HMS Networks Anybus Wireless Bolt II User Manual

® ™
Anybus Wireless Bolt II

8.5. Web Server Certificate Settings

Install a web server certificate in the Bolt II.
Before You Begin
NOTE
The Web Server Certificate file must contain both Certificate and Private key.
NOTE
The device certificate must be a Base64 encoded DER certificate. Use the PEM (Privacy Enhanced
Mail) file format.
NOTE
If the certificate is to be used by HTTPS, the subject name "CN" parameter must be set to the device
address (IP number or DNS name).
Procedure
1. Login to the Bolt II built-in web interface.
2. Navigate to the Security page.
Figure 56. Security page
3. To upload the web server certificate, click Upload.
4. In the Upload web server certificate window, click Select certificate file (.pem).
5. In the Open dialog box, browse to and select the web server certificate file and click Open > Upload
certificate.
6. To install the web server certificate, click Apply in the web-interface header, and follow the instructions.
Page 56 of 68
Web Server Certificate Settings
SCM-1202-209 Version 1.0