Reboot Using The Reset Button - HMS Networks Anybus Wireless Bolt II User Manual

Reboot Using the Reset Button

9.3. Reboot Using the Reset Button
Before You Begin
During reboot, the Bolt II is temporarily unavailable for approximately two minutes.
Procedure
1. Ensure that the Bolt II is powered on.
Figure 63. Power on the Bolt II
2. Use a pointed object, such as a paper clip to quickly press and release the Reset button.
Figure 64. Quickly press and release the Reset button
3. Wait while the Bolt II reboots.
Result
You are logged out of the Bolt II built-in web interface and redirected to the login page.
SCM-1202-209 Version 1.0
® ™
Anybus Wireless Bolt II
Page 61 of 68