Summary Of Keyboard Commands; Command Mode And Osd; Changing, Resetting, And Deleting The Hot Key And The Fast Key - Ihse Draco tera enterprise 480 Series User Manual

Draco tera enterprise
8.3

Summary of Keyboard Commands

In the following you find a summary of keyboard commands that can activate extender module and matrix
functions after executing the Hot Key.
Keyboard commands are fixed to the position of the keys on the keyboard. Keyboard mapping tables may
vary for country-specific layouts.
 Note the key position of a freely defined Hot Key when changing the keyboard layout, e.g., from
QWERTZ to AZERTY. E.g., if defining 2x a as Hot Key on a German or US keyboard layout, the French
keyboard layout (AZERTY) requires then 2x q as Hot Key to be pressed instead.
8.3.1

Command Mode and OSD

8.3.1.1

Changing, Resetting, and Deleting the Hot Key and the Fast Key

Hot Key
Keyboard command
Hot Key, c, new
Hot Key code, Enter
Hot Key, c, 0, new
Hot Key, Enter
Right Shift + Del within
5 s after switching on
the CON Unit or
plugging in a keyboard
Fast Key
Keyboard command
Hot Key, f, Hot Key
Code, Enter
Hot Key, f, o, new
Hot Key, Enter
Hot Key, f, 0, Del, Enter Delete the Fast Key.
Hot Key Code
Hot Key Code
0
2
3
4
5
6
7
8
Function
Change the Hot Key according to the predefined Hot Key Code table.
Define a freely selectable Hot Key.
Reset the Hot Key back to default settings.
Function
Define a Fast Key according to the predefined Hot Key Code table to open the
OSD directly.
Define a freely selectable Fast Key to open the OSD directly.
Hot Key
Freely selectable, ESC, Del, and Enter
2x Scroll
2x Left Shift
2x Left Ctrl
2x Left Alt
2x Right Shift
2x Right Ctrl
2x Right Alt
Operation via Keyboard
295