Restarting, Resetting, And Powering Down Functions Via Osd; Restarting The Matrix; Restarting The I/O Board; Fig. 232 Osd Menu Configuration - Restart Matrix - Ihse Draco tera flex Cat X 1G K480-C16 User Manual

Operation
9.9

Restarting, Resetting, and Powering down Functions via OSD

9.9.1

Restarting the Matrix

To perform a restart of the matrix, proceed as follows:
 Select Configuration > Restart Matrix in the main menu.
The current configuration is saved in the permanent memory of the matrix and matrix will be restarted
with the current configuration.
Fig. 232 OSD Menu Configuration - Restart Matrix
9.9.2

Restarting the I/O Board

To perform a restart of the I/O board, the user's CON Unit is connected, proceed as follows:
 Select Configuration > Restart IO Board in the main menu.
The I/O board will be restarted.
Fig. 233 OSD Menu Configuration - Restart I/O Board
To restart I/O boards with CPU extender modules, use the restart option of the management software (see
chapter 9.10.3, page 307)
300
Draco tera flex