Resetting A Changed Window In A Layout - Ihse MV42 Series User Manual

Configuration via OSD
6.5.8

Resetting a changed Window in a Layout

To reset a window, there are the following possibilities.
Possibility 1
 Move the OSD mouse into the customized window and press Backspace.
The cropped area is reset, and the video signal is displayed in full screen in the customized window.
Fig. 69 Edit mode in Free Mode - Example after resetting a cropped area back to full screen
Resetting via Backspace resets always the window in which the OSD mouse is located.
Possibility 2
 Click the left and right mouse buttons simultaneously inside the window.
The window is reset to its last saved state, or if it has not been changed, to the factory settings with the
current resolution.
Fig. 70 Edit mode in Free Mode - Example after resetting a cropped area back to factory settings
Possibility 3
 Open another layout without saving the unsaved changes of the current layout (see chapter 6.5.9,
page 93).
92
Draco MultiView 4K
60