Figure 3.28: Port Mirroring - Advantech EKI-7659CPI User Manual

Rate Limiting
You can set up the bandwidth rate and frame limitation type for each port.
Ingress Limit Frame type: select the frame type that wants to filter. The frame types have 4 options
for selecting: All, Broadcast/Multicast/Flooded Unicast, Broadcast/Multicast and Broadcast only.
Broadcast/Multicast/Flooded Unicast, Broadcast/Multicast and Bbroadcast only types are only for
ingress frames. The egress rate only supports All type.
All the ports support port ingress and egress rate control. For example, assume port 1 is 10Mbps,
users can set it's effective egress rate is 1Mbps, ingress rate is 500Kbps. The switch performs the
ingress rate by packet counter to meet the specified rate
Ingress: Enter the port effective ingress rate (The default value is "0")
Egress: Enter the port effective egress rate (The default value is "0")
And then, click Apply to apply the settings
EKI-7659CPI_Manual_ed33

Figure 3.28: Port Mirroring

58