Table of Contents
Advertisement
The following table describes the fields in the above screen.
Table 186 Advanced Application > OAM Status
LABEL
Slot (Stacking mode)
Local
This section displays information about the ports on the Switch.
Port
Mode
Remote
This section displays information about the remote device.
Mac Address
OUI
Mode
Config
38.2.1 OAM Details
Use this screen to view OAM configuration details and operational status of a specific port. Click a
number in the Port column in the OAM Status screen to display the screen as shown next.
Chapter 38 OAM
DESCRIPTION
This field appears only in stacking mode. Click the drop-down list to choose the slot
number of the Switch in a stack.
This field displays the number of the port on the Switch. In stacking mode, the first
box field is the slot ID and the second field is the port number. * means all ports (on
the same Switch).
This field displays the operational state of the port when OAM is enabled on the port.
Active - Allows the port to issue and respond to Ethernet OAM commands.
Passive - Allows the port to respond to Ethernet OAM commands.
This field displays the MAC address of the remote device.
This field displays the OUI (first three bytes of the MAC address) of the remote device.
This field displays the operational state of the port when OAM is enabled on the port.
Active - Allows the port to issue and respond to Ethernet OAM commands.
Passive - Allows the port to respond to Ethernet OAM commands.
This field displays the capabilities of the Switch and remote device.
GS3700/XGS3700 Series User's Guide
383
Advertisement
Table of Contents
