Important:
Updating via the Web GUI using a Flash Drive
Use the following steps to update the iAM-SUM software:
1. Copy the unzipped Wohler Update Package file(s) from your computer to the
root directory (not inside of a folder) of a USB flash drive. It must be FAT32
file type, and does not need to be empty. Refer to the
Software
to the USB flash drive.
2. Connect to the iAM-SUM with the Wohler Web GUI. Navigate to the System
| System Update menu, as shown in Figure A-5.
3. Click on the Refresh button.
4. Available software update(s) are shown as in Figure A-6. Click the one you
want, followed by clicking the System Update button.
iAM-SUM
Do not interrupt or remove power to the iAM-SUM, or remove
the USB drive during the installation process. Doing so could crash
the iAM-SUM software.
section of this chapter for the specifics of download and file transfer
Figure A-5 – System Update Menu
Page 90
Download the