What Are Aoip-Pair 9 And Aoip Pair 10; The Web Interface? This Will Allow Us To Monitor Only The Unmuted/Solo Audio Meter Channels On Amplified Stereo Speakers Connected To The Analog Xlr's - Wohler iAM-SUM8 User Manual

What are AoIP-Pair 9 and AoIP Pair 10?

AoIP-Pair 9: Selected inputs will be mixed to AoIP transmit channels 17 and 18.
Note that configuration for channels 1 - 16 is not supported. Use a Dante Controller
or Zman web interface to route these channels appropriately.
AoIP-Pair 10: Selected inputs will be mixed to Channel 19 and Channel 20. Again,
use a Dante Controller or Zman web interface to route the remaining pairs
appropriately.
How do I ensure that my outputs are pre-faded but follow the
solo-mutes on the web interface? This will allow us to monitor
only the unmuted/solo Audio Meter channels on amplified stereo
speakers connected to the Analog XLR's.
In the Output Routing setting, for the Analog XLR outputs, keep the Volume
Control checkbox unchecked and the Solo/Mute checkbox checked. This ensures
that the Volume Control is not applied to the outputs, while the Solos/Mutes are.
Page 76
iAM-SUM