How Do I Keep The Internal Speakers Muted And Have Audio Only On The Analog Xlr Outputs; How Do I Ensure That The Outputs Are Automatically Muted When The Headphone Jack Is Inserted - Wohler iAM-SUM8 User Manual

How do I keep the internal speakers muted and have audio only
on the analog XLR outputs?
When the optional OPT-OUTPUT-ROUTING license is purchased, in the Global
Output Routing configuration, do not select any Speaker Headphone
checkboxes for any meter channels as shown below, and then select the desired
meters for Analog XLR. In this way, the internal speakers will always be muted, but
the audio will appear on the Analog XLR outputs (for amplified external speakers).
Make sure that the Speaker Mix checkbox selection is unchecked for Analog/XLR.
How do I ensure that the outputs are automatically muted when
the Headphone jack is inserted?
When the optional OPT-OUTPUT-ROUTING license is purchased, in the Global
Output Routing configuration, if the Mute on Headphone Insertion checkbox is
ON then the outputs get automatically muted when a headphone is inserted into
the Headphone jack.
As shown below, if a headphone is inserted then the output on the Analog XLRs will
be muted, while the audio on AES Pair 1 will remain on.
Page 75
iAM-SUM