Output Routing - Wohler iAM-SUM8 User Manual

12. When you have finished creating a Preset or making changes to a Preset,
either click the Save button to save the Preset, click the Save & Apply
button to save the Preset and make it the current Preset, or click the Reset
button to discard the changes just made. These selections are shown in
Figure 4-16.

Output Routing

The Output Routing licensed feature (OPT-OUTPUT-ROUTING) allows channels to
be routed or combined and routed in custom ways to various destination outputs.
Output Routing is applied to:
1. Signals monitored using "Input Source select" from the Front Panel,
2. Presets that have been created to apply the Output Routing.
Any change to the routing will affect the Presets that have "Apply Output Routing"
selected. For example, multiple channels of a 7.1 channel program can be
combined and directed to the left or right internal speakers. Six or eight channels
could be directed to the AES outputs, which could feed an external surround sound
system. Contact Wohler Sales to purchase the license for the OPT-OUTPUT-
ROUTING feature.
If Output Routing is not licensed, then any of the inputs can be monitored in
stereo or mono only through the internal speakers. The headphone jack, the analog
XLR outputs, and the first AES output will follow whatever is directed to the
speakers.
When licensed, select Global Output Routing under Configuration. This will
display the Global Output Routing screen. This screen contains a matrix of
checkboxes which are an easy way for you to set up the wide variety of input to
output routing and mixing capabilities. The Global Output Routing screen is
iAM-SUM
Figure 4-16: Output Routing Preset Tab
Page 69
Default Output Routing