Table of Contents
Advertisement
The channels to be multicast are selected in the File menu-Create Multicast
Flows window shown in Figure B-7.
Device Lock
Audinate recently added a feature whereby a remote controller can send a
command to lock Dante network device configurations. The iAM-SUM does not
implement the Device Lock command at this time.
Dante Firmware Upgrades
Wohler iAM-SUM monitors ship with current Brooklyn II firmware as of the option
installation date. The version information is found in the Dante Controller Device
View-Status page. iAM software/firmware is tested with the latest Dante code
release. Therefore it is strongly recommended that iAM-SUM and Dante software/
firmware be updated at the same time to ensure compatibility and support of the
latest features.
Use the Audinate Dante Firmware Update Manager Windows or OS X application
to update the Dante firmware over the Dante network. Follow the application's
installation and usage guide plus any applicable technical notes available.
iAM-SUM
Figure B–7: Multicast
Page 103
Advertisement
Table of Contents
