Table of Contents
Advertisement
SFP-2022-6 / SFP-2110 Address Setup
While the optional SFP-2022-6 and SFP-2110 modules monitor program audio
created from distinctly different technologies, both are connected to the network in
the same way and have the same requirements for addressing. Figure 2-7
illustrates the network connections they need.
Figure 2-7: SFP-2022-6 and SFP2110 Network Diagram
The optional SFP-2022-6 or SFP-2110 module furnished by Wohler Technologies is
manufactured by Embrionix and comes from the factory with a default IP address.
To integrate it into your digital network, you need to set its address to the source to
be monitored. You must use the MN-Set configuration software to set up this
option. It is available from Wohler Technologies Technical Service. The procedure to
accomplish this is described in the SFP-2022-6 / SFP-2110 Setup Guide (part
number 821822), which is available at
iAM-SUM
Broadcast Equipment
Throughout the Facility
192.168.39.217
Ethernet Network & Switch
PC
iAM-SUM with SFP-2022-6 / SFP-2110
Page 18
Fiber
Optic
192.168.39.215
https://wohler.com/downloads/
.
Advertisement
Table of Contents
