Source Inputs; Output Options - Wohler iAM-SUM8 User Manual

Multi-channel audio monitor/mixer
Table of Contents

Advertisement

7. AoIP/Pair-9 (DANTE / RAVENNA): Selected inputs will be mixed to AoIP
transmit channels 17 and 18. Note that configuration for channels 1 – 16 is
not supported. Use a Dante Controller or Anneman/Zman web interface to
route these channels appropriately.
8. AoIP/Pair-10 (DANTE / RAVENNA): Selected inputs will be mixed to
Channel 19 and Channel 20. Use a Dante Controller or Anneman/Zman web
interface to route the remaining pairs appropriately.

Source Inputs

The source inputs which may be routed are described in this section.
1. Cluster Information: Cluster information show type of cluster and cluster
name.
2. Speaker Assignment: Speaker assignment can be used to configure to
which speakers the audio is routed to. The possible options are:
Left
L
R
Right
Center
C
Low Frequency Effects
LFE
Left Surround
Ls
Right Surround
Rs
Back Surround Left
Bsl
Back Surround Right
Bsr
Mono Surround
S
3. Input/Output Matrix: By checking the various boxes in this matrix, any
input channels can be freely routed to any output channels. This flexible
channel assignment is called a Free Mix. However, when the Speaker Mix
box is checked in the Output Options section, the associated row within the
matrix is automatically set to the speaker mix and the checkboxes are
grayed out indicating that you may not change them with a Free Mix
assignment.

Output Options

The optional settings in this section allow for customization.
1. Speaker Mix: This option selects whether an output has the Speaker Mix
or a Free Mix as set in the Routing Input section. The Speaker/Headphone
output is always in the Speaker Mix.
2. Solo/Mute: This setting determines whether or not the outputs are affected
by solos and mutes. The Speaker/Headphone output is always affected by
solos and mutes. Note also, that all outputs in Speaker Mix mode also are
affected by solos and mutes.
3. Mute on Headphone Insertion: This option controls whether the outputs
should be muted upon a headphone insertion. This setting can be adjusted
iAM-SUM
Page 71

Advertisement

Table of Contents
loading

This manual is also suitable for:

Iam-sum16Iam-sum328121-03508121-03518121-0352

Table of Contents