Table of Contents
Advertisement
Presets
Presets are pre-arranged input and monitoring setups that can be used to monitor a
variety of combinations of inputs. They may be set up to allow quick and easy
selection of monitoring configurations for various productions and situations. If you
have not set up any Presets, use the Configure Presets page in the Web GUI to do
so. Refer to Chapter 4. Or, if you prefer not to set up any Presets, simply monitor
the sources directly using the Source Select button in the Menu.
In addition to the menu access described in the following two sections, the Source
control can be used to directly select any Preset or any Favorite Preset. Refer to the
Source Knob Select setting in the Unit Config menu.
All Presets
Touch the All Presets button to display the All Presets Group Selection screen as
shown in Figure 2-16. If no Presets have been created, the screen in Figure 2-18
appears instead.
Figure 2-16: All Presets Screen - Group Selection
The Presets are normally arranged into Groups. Use this screen to select which
Preset-containing Group to examine. After selecting one of the Groups, the Preset
Selection screen shown in Figure 2-17 is shown.
Page 29
iAM-SUM
Advertisement
Table of Contents
