Reboot System
The Reboot System page allows you to reboot an iAM-SUM remotely. The Reboot
System page is shown in Figure 4-27. This function is normally only used upon
request from Wohler Technical Service to troubleshoot or correct an issue.
The Reboot System function should be used with a bit of caution. It puts the iAM-
SUM out of service for several minutes while it is rebooting, and this may
unexpectedly interfere with the use of the product by the remote operator.
Figure 4–27: Reboot System
If you have any doubt as to whether you should reboot the remote iAM-SUM,
do
not
click the Reboot System button. Contact Wohler Technical Service for advice.
Page 86
iAM-SUM