Table of Contents
Advertisement
This will save the changes you selected.
2. Touch the Cancel button to return to the previous screen without saving any
changes.
Important:
There is no confirmation for Save and Exit, so make sure you want to
perform this action before taking it. The system will not need to reboot
before it is once again ready for operation.
System Reboot
Touching the System Reboot selection on the System Options Menu displays the
System Reboot screen as shown in Figure 2-32. This function is normally only
used upon request from Wohler Technical Service to troubleshoot or correct an
issue.
The System Reboot function should be used with a bit of forethought. It puts the
system out of service for several minutes while it is rebooting.
If you have any doubt as to whether you should press Yes, press Back or No
instead, and contact Wohler Technical Service for advice. Pressing Back or No will
return you to the System Options menu.
iAM-SUM
Figure 2-32: System Reboot
System Reboot
Are you sure?
You wish to Reboot the
System?
Yes
Page 40
Back
No
Advertisement
Table of Contents
