How Do I Route Whatever Is Being Monitored To The Xlr And Aes Outputs; How Do I Have A Downmixed Pre-Fade Output On Aes Pair-1 Combined With A Post-Fade Output On The Analog Xlrs; How Do I Make The Xlr Outputs Follow The Audio Meter Screen Solos & Mutes While The Aes Pair-1 Does Not - Wohler iAM-SUM8 User Manual

change the Output Routing unique to any Preset. Changes to either of these are
disabled if the OPT-OUTPUT-ROUTING license is not purchased.
How do I route whatever is being monitored to the XLR and AES
outputs?
Using Global Output Routing (optional licensing upgrade), you may route any
signals to the XLR & AES outputs. You may route signals to the XLR outputs using
the Analog/XLR checkboxes and route signals to the AES outputs by using the
AES/Pair 1 to Pair 4 checkboxes.
As shown in the above example, signals appearing on Audio Meter channels 1
through 4 are routed to AES Pair 1 and signals from Audio Meter channels 5 to 8
are routed to the Analog XLR outputs.
How do I have a downmixed pre-fade output on AES Pair-1
combined with a post-fade output on the Analog XLRs?
To downmix a pre-fade output on AES Pair-1, uncheck the Volume Control
checkbox for that AES pair. For a Post-fade output on the Analog XLRs, check
Volume Control checkbox.
How do I make the XLR outputs follow the Audio Meter screen
solos & mutes while the AES Pair-1 does not?
Make the settings shown in the Solo / Mute column:
Page 73
iAM-SUM