Table of Contents
Advertisement
Preset, press and hold the Channel Trim knob for 3 seconds.
7. Loudness Cluster Indicator: The current selected Cluster which is
undergoing Loudness analysis is indicated by an orange bracket.
8. Loudness Reading: This indicator displays the Loudness of the selected
Cluster. This is also a button which allows you to select which Cluster will
receive Loudness analysis.
9. Phase Indicator: This indicator will normally be dark green if the two
channels are in phase. If the two channels are out of phase, the indicator
will light red. Note that the Phase Indicator does not appear for Clusters
that only contain a single channel.
10. Source: The input source of the displayed channels is displayed.
11. Menu Selector: Touch the Menu button to cause the Main Menu to
appear.
Operating the Monitor
The audio mixer terminology of "solo" is used in this manual when referring to
muting all but a specific Cluster or channel listening only to that cluster or channel.
Add or remove Clusters from the Monitor Mix
To add a Cluster to the monitor mix, simply touch the channel meters for that
Cluster. Touch that Cluster's channel meters again to remove it.
Alternatively, rotate the Channel knob so that the white box surrounds that Cluster
and then press the Channel knob. Press the Channel knob again to remove the
Cluster.
Solo a Cluster
To solo a Cluster, simply touch and hold the channel meters for that Cluster for 3
seconds. A blue box will surround the cluster and it will be the only Cluster heard.
Touch that Cluster's channel meters again to remove the solo and return to
monitoring the Clusters the way they were before the solo.
Alternatively, to solo a Cluster, rotate the Channel knob until a white box
surrounds the meters of the cluster to be soloed. Press the Channel knob for 3
seconds. A blue box will then surround the cluster and it will be the only Cluster
heard. At this point you may rotate the Channel knob to move the blue box to solo
other Clusters. Press the Channel knob once again to remove the solo and return
to monitoring the Clusters the way they were before the solo.
iAM-SUM
Page 20
Advertisement
Table of Contents
