Table of Contents
Advertisement
on that line and select Web Services: Advanced (or Ravenna) to bring up the
Merging Ravenna configuration page. Also, the ICON of the card will appear in the
main part of the Aneman screen. Double Clicking on the ICON also will load the
Configuration screen.
For browser access, the URL is <Ravenna subnet>.x/advanced/index.html. This
brings up the Merging Ravenna configuration page. Each tab is explained in the
following sections.
Getting Started | General Settings
This tab is shown in the following figure.
The elements of this tab are as follows:
1. Device Name: Enter a useful Device Name for the card, which will show up
on other Ravenna devices on the subnet.
2. Sample Rate: (44100-48000- 88200-96000-176400-192000-352800-
384000)
3. Frame size (@1Fs): current frame size (64 - AES67/48 - 32 -16 - 12 -6).
4. Safety Playout Delay (@1Fs): The value is described at 1Fs (44.1-48 kHz)
in samples. For example, if the value is 10, the additional playout delay will
be 20 at 2Fs (88.2-96 kHz), 40 at 4FS (176.4-192 kHz)
5. SSM Source-Specific Multicast: If needed, configure the network switch
for IGMP V3.
6. Network Interface: Note the address of the card and its type (Zeroconf,
DHCP, Static). (If necessary, the address can be changed to another type
such as a Static address which must include a Network Mask and Gateway.)
iAM-SUM
Figure D-1: Getting Started | General Settings
Page 107
Advertisement
Table of Contents
