Table of Contents
Advertisement
Preset Management
Presets are monitoring configurations that can be composed of channels from
multiple sources and displayed on the meters in any order. Presets should be set up
to allow operators to quickly shift between setups for monitoring. The Preset
Management screen contains selections of all of the details for a Preset, and is
largely arranged in a matrix format connecting input channels to monitoring
channels. The screen is shown in Figure 4-14.
Preset
Management
1. Preset Configuration: You may create a new Preset, adjust an existing
Preset, or create a new Preset from an existing Preset:
To create a new Preset, enter the name for the new Preset in the
•
field to the left of the word Preset. Then make all of the settings
needed and save it.
To make changes to an existing Preset, select it from the pull
•
down list, make the needed changes and save it.
To create a new Preset starting with an existing Preset, first
•
select the existing Preset from the pull down list. Next, enter the name
for the new Preset and save it. Then make the needed changes and
iAM-SUM
Figure 4–14: Configure Presets
Clock
Autofill
Preset Input/Output Matrix:
Selection
Selection
Page 65
Preset Input Routing
Advertisement
Table of Contents
