Table of Contents
Advertisement
CHAPTER 1: Installation
Introduction
Overview
The iAM-SUM Series is a set of well featured, easy to use and competitively priced
IP ready audio monitors /mixers available in 8, 16 or 32 channel configurations.
Whether monitoring 8, 16 or 32 channels, the unit can be configured to operate in
channel mode and/or pair mode. Standard features include 3G-SDI and a pair of
Analog inputs and outputs. Upgrade/license other signal formats and processing
options, as and when needed, either initially or after purchase. Refer to the
Specifications section of this manual or contact Wohler Sales for more information.
The iAM-SUM is compact and simple to operate, with straightforward controls. It
has a very wide format touch screen LCD display providing up to 8, 16, or 32 high
resolution level meters, depending upon the model. Any audio channels (or channel
pairs) from any audio/video source stream may be monitored.
The iAM-SUM includes two 3G SDI inputs, one switched 3G SDI output, and a pair
of analog inputs and outputs. Optional modules will allow decoding of an additional
SDI input, MADI, AES3, SMPTE 2110, SMPTE 2022-6, and AES streams. It contains
APIs for remote management.
Optional Output routing enables the flexibility to route input signals to various
outputs. Optional I/O for AES3 on HD-15 (including selected audio source converted
to AES3 out), MADI on BNC (and looped output), and SMPTE 2110 or SMPTE 2022
via SFP is offered. Option cards will allow choice between AoIP, an additional 8
channels of analog inputs and outputs, or 2 additional SFP cages.
Setups are created and configured using local menus and a web browser over a
network connection to the integral web server of the iAM-SUM. Up to 64 Presets are
accommodated. The web server will also allow you to view the audio meters
remotely.
Safety
Instructions
1. Read, keep, and follow all of these instructions; heed all warnings.
2. Do not use this equipment near water.
3. Use only a dry cloth to clean the equipment.
4. Do not block any ventilation openings.
5. Do not install near any heat source such as a radiator, heat register, amplifier, or
stove.
6. Do not attempt to plug the unit into a two-blade outlet (with only two prongs of
equal width).
iAM-SUM
Page 7
Advertisement
Table of Contents
