Table of Contents
Advertisement
3. Status:
a. Lock: This shows if the device is locked to PTP (Locked -Locking -
Unlocked)
b. Master: This is true or false for the current device.
c. GMID: This is the current GrandMasterID (PTP Master)
d. Delta (ns): This is the time delta between the device and the PTP
master.
4. Graph: The graph is only active for slave devices and shows the device delta
against Master PTP clock.
5. PTP Priority Value:
a. 1 is the highest priority, 255 the lowest one.
b. Merging card is by default using Priority 127 when set as PTP Master
and 255 when PTP slave.
Getting Started | Session Sources
This tab defines which Streams are to be Sourced from this card. It is shown in the
following figure.
The elements of this tab are as follows:
1. Create session button: Create a new session sources by clicking on left
ICON.
2. IO: Select the physical input (when applicable).
3. Name: This is the Source name.
4. Advertise: Check to enable source advertising on the network.
5. Auto-unicast - (RTSP): Check to automatically retrieve the sink (listener)
IP address:port for unicast connection.
6. Address: This the stream's multicast address. Note that the user defined
checkbox is activated automatically when entering a multicast address
manually.
7. TTL: Time to Live (also called Hop Limit) - This value should not be modified.
iAM-SUM
Figure D-3: Getting Started | Session Sources
Page 109
Advertisement
Table of Contents
