Rear Panel - Wohler iAM-SUM8 User Manual

Rear Panel

The rear panel is shown in Figure 2-2.
Balanced XLR Balanced XLR
Analog Inputs Analog Outputs
Balanced DB-
Balanced DB-25
25 Analog
Analog Inputs
SFP Module SFP Module
Cage
Power Connection: The iAM-SUM receives power from an AC inlet, which is a standard
IEC receptacle for 100 to 240 VAC ±10%, 50/60 Hz power connection. Four regional AC
power cords, supplied according to shipping region, are available.
Important:
By design, the supplied AC mains power cord will only plug into a
three-prong grounded outlet for your safety. If the plug does not fit
into the outlet, contact an electrician to replace the obsolete outlet.
1. SDI Inputs: These two BNC connectors accept the two 3G/HD/SD-SDI
input signals containing audio to be monitored. This is a standard feature.
2. SDI Output: This BNC connector outputs the selected 3G/HD/SD-SDI or
SFP module input signal.
3. Network Port: This Ethernet port can connect to either a LAN or to a PC
to let you perform administrative tasks remotely. The Wohler Web GUI is
described in Chapter 4 of this manual. Third party equipment, connecting to
the iAM-SUM via a LAN plugged into this port and using an API commands,
can view and change product options, as well. This API is described in
Appendix E of this manual.
4. MADI BNC: (optional) The COAX input accepts an AES10 64-channel
signal at 48 kHz sample rate. An optional license key must be purchased to
iAM-SUM
Figure 2-2: iAM-SUM Rear Panel & Option Cards
Option Card
Slot
Network SDI
Port Inputs
TOSLINK
Optical
Outputs
Input
Cage
MADI
SFP Module
Cage BNC
SDI MADI
Output Fiber SFP
Combo
Port
AoIP SFP
Module Cage
1GB Ethernet
Page 13
AES Inputs
Connection
AES Outputs
Primary / TOSLINK
Secondary
Optical
Input
Ports
Power