Authorized Personnel - Rotax 912 Series Maintenance Manual

1.2)

Authorized personnel

General note It is a requirement that all organizations or individuals possess the
required special tooling. Technicians must have type-specific training and
keep a recurrent knowledge status for the level of work they intend to per-
form. Technicians may require accreditation from their local aviation
authority in addition to any BRP-Powertrain requirements.
Type-specific
Any task outlined herein may be performed if the organization or individual
training
has met the following conditions:
-
-
-
-
-
-
-
-
Information
Maintenance organizations and individuals are encouraged to contact
BRP-Powertrain through its worldwide distribution network for information
and guidance on any of the tasks outlined herein.
See chap. 00-00-00 section: 3.4).
Effectivity: 912 Series
Edition 3 / Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
Requisite knowledge of the task as a result of:
Type-specific training (for the applicable ROTAX aircraft engine) which is
approved by the national aviation authority and/or BRP-Powertrain.
Experience in performing the task or
Formal instruction from a BRP-Powertrain authorized training facility or
Instruction by an authorized BRP-Powertrain Distributor representative.
Suitable work environment to prevent contamination or damage to engine parts or
modules.
Suitable tools and fixtures as outlined in the ROTAX Maintenance Manual.
Reasonable and prudent maintenance practices are utilized.
And the Requirements of the applicable regulatory authority regarding mainte-
nance procedures are met.
or
Including:
05-00-00
page 4
September 01/2012