Maintenance Concept - Rotax 914 series Maintenance Manual

3.3)

Maintenance Concept

The maintenance functions detailed in this Manual fall into two catego-
General note
ries:
- Maintenance I (Line Maintenance)
- Maintenance II (Heavy Maintenance)
Repairs beyond the levels detailed in this Manual are not recommended
as maintenance functions and must be done by an authorized overhaul
facility.
Chapter 00,05 and 12
Maintenance I
(Line Mainte-
The scope of line maintenance consists of removal, installation and
nance)
adjustment of engine components (including part wear). All procedures in
this Manual are to be considered line maintenance.
NOTES:
separate Manual
Maintenance II
(Heavy Mainte-
Maintenance Manual II details removal, installation and repair of compo-
nance)
nents or parts normally considered beyond the capabilities of the "Line
Maintenance".
NOTES:
Effectivity: 914 Series
Edition 2 / Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
Where applicable, you will be referred to the Heavy Main-
tenance Manual for work above and beyond line mainten-
nace.
This Manual can only be used in combination with Main-
tenance Manual I (Line Maintenance), as it builds up on it.
00-00-00
page 13
January 01/2010