Updating Your Matrox Extio 3 Firmware (Networked-Lan Mode) - Matrox Extio 3 Series User Manual

Updating your Matrox Extio 3 firmware (Networked-LAN mode)

Note:
package matches the version of the Matrox Extio Central Manager software package
installed on your controller system.
Download and extract the firmware package
1
Download the latest firmware package and extract the files to a local folder on your system
(for example, C:\Extio3FirmwareUpdate).
Run the Updater Over Network file
2
Browse to the folder containing the extracted files, then run the UpdaterOverNetwork.exe file.
Search for available Extio 3 devices or locate your Extio 3 device
3
using the IP address
Automatic detection – To search for the Extio 3 devices on your subnet, select
detection
To start searching for devices, click
Manual detection – If devices aren't
automatically detected, you can manually
locate one or more Extio 3 devices using
their IP address. To manually locate the
devices, select
Address or URL
Extio 3 device you want to locate.
If you're entering multiple addresses,
separate each address with a space. (You can
also enter the addresses or URLS by clicking
the browse button (
address per line.)
When you're done entering the addresses or
URLs, click
changes made, click
To start searching for devices, click
To stop searching for devices, click
48 Matrox Extio 3 Series – User Guide
If you're using Networked-LAN mode, make sure the version of your firmware
.
Manual detection
enter the IP address of each
) and entering one IP
. To discard the last
Apply
.
Cancel
.
Search
, and next to
.
Search
. To resume searching for devices, click
Stop
Automatic
again.
Search