Mounting Guidelines For Under Desk Mount Kit; Mounting Your Extio 3 Device Using An Under Desk Mount Kit - Matrox Extio 3 Series User Manual

Mounting guidelines for under desk mount kit

To prevent damage to your Matrox hardware, read the following guidelines before mounting your
Matrox hardware:
Use a hand screwdriver to carefully tighten each screw. Make sure to not over tighten the

screws.
 Make sure the cables connected to your unit are properly secured and that no tension is
applied to them.
 Make sure the ambient temperature doesn't exceed the maximum recommended
temperatures. For more information, see the "Product information" section of your user
guide.
Once your unit is mounted, you can connect your system, monitors, and devices to your Matrox unit.

Mounting your Extio 3 device using an under desk mount kit

You can mount your Extio 3 devices under a desk or to a similar flat surface using the two (2)
mounting brackets included in your kit.
If needed, peel off the rubber bumpers from the bottom of your unit, then position the

brackets as shown.
Matrox Extio 3 Series – User Guide 103