Matrox Extio 3 Series User Manual page 50

Sync time on all devices
5
If you want to sync the date and time of your device with the date and time of your system,
enable
Reset configuration
6
If you want to reset device settings, including the IP address, while updating the firmware,
enable
Update selected devices
7
To update the firmware of your devices and apply any changes made to your configuration,
click
Update
For more information on the device update process, click
the program window.
Store a certificate file on the device for IEEE 802.1X EAP-TLS
To enable using your device on a 802.1X EAP-TLS network, you need to first upload a
certificate file to the device using the firmware updater. Note: During the firmware update
process, the following progress status message will display: Updating "EAP TLS certificate".
The certificate file must be named eaptls_cert.pem and placed in the update package. The
firmware updater will verify and deploy it to the right location. Note: If the content in the
eaptls_cert.pem file doesn't meet the requirements, the following message displays: "EAP TLS
CERTIFICATE: file eaptls_cert.pem is invalid or corrupt". If this happens, verify the structure
and the contents of the file.
Note:
your IT department.
This certificate file must contain the following elements:
A certificate to identify the device. This certificate will be used by the 802.1X

authentication server to authenticate the device.
The private key associated with the device certificate.

50 Matrox Extio 3 Series – User Guide
Sync time of all devices
.
Reset configuration
. Wait while the devices are being updated.
You can get all the details that are required to be contained in the certificate file from
.
( ) at the bottom of
Show log