Matrox Extio 3 Series User Manual page 59

Enable link redundancy
Disable shutdown using
power button
Power recover policy
Reboot transmitter
Reboot receiver
Reboot both devices
Input and output information
View the connection information of the devices (
selected transmitter.
Details
Provides information (such as the model, serial number, firmware package version, and the
minimum, current, and maximum internal temperature of the receiver) on your Extio 3 device, and
provides the connection status and IP address of the device (connected through
Get logs
Provides detailed logs that are useful for diagnostics and troubleshooting.
Click the
1
Insert a new USB mass storage device in the receiver.
2
In the
3
inventory
4 Click
To ensure network uptime in case of network failure, enable
the
Enable link redundancy
failure, your device will automatically switch to a secondary
network path. For more information,
redundancy", page
To disable the power button on your device, enable
power button
 Never start
 Always start
loss.
 Restore last state
your Extio device after a power loss.
Click this to reboot your transmitter device.
Click this to reboot your receiver device.
Click this to reboot both the transmitter and receiver devices.
button. The
Get logs
Note: Only USB keys are supported, not USB drives.
dialog box, select this USB device from the
Log files retrieval
list as the location where you want to save the log files.
. The zip files of the logs are created in the root folder of the USB device.
OK
option. In the case of a network
41.
.
–
Never start your Extio device after a power loss.
–
Always start your Extio device after a power
–
Always start and restore the last state of
,
Monitor Microphone
dialog box appears.
Log files retrieval
Matrox Extio 3 Series – User Guide 59
see "Setting up link
Disable
, and ) connected to the
Line In
).
LAN
USB mass storage