Installing the SFP module
When installing the SFP (Small Form Factor Pluggable) module, make sure you properly secure the
module in its housing.
To install the SFP module:
Close the latch handle.
1
Push the module into the SFP housing
2
in your Matrox product. Make sure the
module is properly oriented. A properly
oriented module should slide easily into
the housing.
Make sure the SFP module is inserted all
3
the way into the housing, When locking
in place, you may hear a "click" sound.
To make sure the SFP module is securely
inserted, you can pull gently on the
module without lowering the latch
handle.
Removing the SFP module
WARNING:
module is securely locked in its housing.
Forcing the SFP module out of its housing
without unlocking it may damage your
SFP module, the housing, or your Matrox
product.
A properly installed SFP
(RJ45 SFP module shown)
Matrox Extio 3 Series – User Guide 39