2
In the
language from the
Click
3
Note:
Central Manager.
When you make the change, it takes effect immediately (there is no need to reboot or
restart the device).
Only the last change made is retained. You cannot have user-specific language settings. For
example, once you log out, the next user to log in will see the OSD interface in the language
you changed it to. The next user can change it again to a different language if required. In
this case, when you log in the next time, you would have to change the settings to your
preferred language again.
Using OSD command shortcuts
You can use keyboard mnemonics for command shortcuts in the OSD user interface. Press and hold
the
key to see the underlined letter that corresponds to a command shortcut.
ALT
,
Disconnect
Wake-on LAN
Configure language settings
Language
.
Close
The language you change to will override the default language set in Matrox Extio
, and
are some command examples in the receiver OSD.
Close
screen that appears, select the OSD interface
drop-down list.
Matrox Extio 3 Series – User Guide 19
,
Connect