Enabling Link Redundancy; Disabling Link Redundancy - Matrox Extio 3 Series User Manual

 Make sure the
redundancy
page

Enabling link redundancy

To enable link redundancy:
Enable the
1
2 For the changes to take effect, your device will automatically reboot.
After your device reboots, connect the second network cable to your device
3
"Connecting your Extio 3 devices", page

Disabling link redundancy

To disable link redundancy:
1 Disconnect the second network cable
Make sure your devices are detected on the network.
2
3 Disable the
42 Matrox Extio 3 Series – User Guide
and
LAN1
feature. For more information,
31.
Enable link redundancy
Networked mode – In Extio Central Manager software, select your Extio device,

click , and then enable the
Network
information, see your Matrox Extio Central Manager User Guide.
Point-to-Point mode – In the OSD, click

option
link redundancy
Enable link redundancy
Networked mode – In Extio Central Manager software, select your Extio device,

click , and then disable the
Network
information, see your Matrox Extio Central Manager User Guide.
 Point-to-Point mode – In the OSD, click
option. For more information,
link redundancy
page 59.
connectors are connected before enabling the
LAN2
see "Connecting your Extio 3 devices",
option in your Matrox software:
Enable link redundancy
More options
(see "Input and output information", page
31).
(see "Connecting your Extio 3 devices", page
option in your Matrox software:
Enable link redundancy
More options
option. For more
, and then enable the
59).
option. For more
, and then disable the
see "Input and output information",
Link
Enable
(see
31).
Enable