Matrox Extio 3 Series User Manual page 44

Extio N3408 or N3208 unit
Power LED
LED color
Green (standby)
Green (solid)
Green (slow blink)
Green (fast blink)
Amber (solid)
Amber (slow blink)
Amber (fast blink)
Red (solid)
Red (slow blink)
Red (fast blink)
Black (no LED)
44 Matrox Extio 3 Series – User Guide
Power LED
Device is turned off but still
powered.
Device is active.
Device is restarting.
Configuration reset in process.
Device is in maintenance mode.
Device is restarting and is in
maintenance mode.
Device is updating the firmware.
—
—
Error detecting the driver.
No power. Make sure your device
is properly installed. Also, make
sure your system isn't in power
saving mode (see "Connecting
your Extio 3 devices", page
For more information, contact
your vendor (see "Customer
support", page 112).
Status LED
—
Software is ready.
—
—
Device is restarting.
Firmware mismatch detected.

Transmitter – No USB
connected.

Receiver – No keyboard
detected.

Transmitter – No source
detected.

Receiver – No monitor
detected.
No network detected or network
cable connection is invalid
"Setting up link redundancy",
page 41).
Fatal error occurred.
—
31).
Status LED
(see