Hardware Required (Sold Separately); Optional Hardware (Sold Separately) - Matrox Extio 3 Series User Manual

Networked-
Internet / WAN
with Site-to-
Site VPN mode
Networked-
Internet with
IPSec VPN
mode
* The On-Screen Display (OSD) is available only on the receiver.

Hardware required (sold separately)

Depending on your device and setup, you may need the following hardware:
 CAT5e, CAT6, or CAT7 cable
 LC-LC fiber optic cable
Shielded DisplayPort™ 1.1 or 1.2 cable


Optional hardware (sold separately)

You may also need any of the following hardware:
Multi-mode fiber optic transceiver

 Single-mode fiber optic transceiver
Mini DisplayPort to DisplayPort adapter

 Analog audio cable
Matrox secure cable solution

* Shielded DisplayPort™ 1.2 cable is required for 4K60 resolutions.
† To purchase a multi-mode fiber optic transceiver (part number XTO3-SFPMM) or single-mode fiber optic transceiver (part
number XTO3-SFPSM) for your Matrox product, contact your Matrox representative.
‡ Not recommended for 4K60 resolutions.
10 Matrox Extio 3 Series – User Guide
Log into your receiver and switch to
different transmitters. For more
information, see "Setting up
networked mode (LAN or Internet /
WAN with Site-to-Site VPN)", page
61.
Log into your receiver and switch to
different transmitters. For more
information, see "Setting up
networked mode (Internet with
IPSec VPN)", page
Multi-mode (62.5/125 µm (OM1), 50/125 µm (OM2, OM3, or OM4))

 Single-mode (9/125 µm (OS1 or OS2))
Remotely manage, monitor, and
configure your networked Extio 3
devices. For more information,
"Installing Matrox Extio Central
Manager software", page
Remotely manage, monitor, and
configure your networked Extio 3
devices. For more information,
"Installing Matrox Extio Central
74. Manager software", page
*
†
†
‡
see
62.
see
75.