Adding Rules To Your Windows Firewall Settings - Matrox Extio 3 Series User Manual

2 Windows 11 and Windows 10 – In the left panel, click
Windows 7 – In the left panel, click

Adding rules to your Windows Firewall settings

Note:
more information, see Windows documentation or contact your system administrator.
Windows 11/10/7 –
Windows 11 – Click
1
Firewall and security settings.
Windows 10 – Click
Firewall
Windows 7 – Click
Center
2 Windows 11 and Windows 10 – In the left panel, click
Windows 7 – In the left panel, click
Click
3
In the
4
5 In the
100 Matrox Extio 3 Series – User Guide
You may need administrator rights to modify your Windows Firewall settings. For
Start
Start
.
Control Panel
*. (* Depending on your configuration, these steps may be unnecessary.)
.
Inbound Rules
panel, click
Actions
 – Select
Rule Custom
 – Select
Program All programs
 – Next to
Protocol and Ports
. For the port number, enter
ports
– Under the remote IP address, add the IP range you want to use for your

Scope
transmitter. You can use a range (such as 192.168.1.0/24) or a single IP address (such
as 192.152.168.62).
 – Select
Action Allow the connection
 – Select the network location of your system (
Profile
 – Enter the name for your rule (such as Extio 3 – TCP rule).
Name
panel, click
Actions
– Select

Rule type Custom
 – Select
Program All programs
– Under

Protocol and Ports
Windows Firewall
 
Settings Network & Internet
 
Settings Network & Internet

Network and Internet
Windows Firewall
. Configure the new rule with the following settings:
New Rule
.
.
, select
Protocol
. Next to
445
.
. Configure the new rule with the following settings:
New Rule
.
.
, select
Protocol type
Advanced Settings

Advanced Settings

Ethernet

Ethernet
*

Network and Sharing
Advanced Settings

Advanced Settings
. Next to
TCP Local port
, select
Remote port All Ports
,
Domain Private
.
ICMPv4
.
.

Configure

Windows
.
.
, select
Specific
.
, or ).
Public