Aggregator Mode - Matrox Extio 3 Series User Manual

Details
Provides information (such as the model, serial number, firmware package version, and the
minimum, current, and maximum internal temperature of the receiver) on your Extio 3 device and
the connection status and IP address of the device (connected through

Aggregator mode

With aggregator mode, your Extio 3 receiver unit can gather video streams from multiple Extio 3
transmitter units into a single layout.
Before you begin
 Make sure the
Fixed EDID
 Audio configuration – Review your system's Windows® audio settings to know which
DisplayPort output is configured to use audio. Depending on your audio configuration,
we also recommend you review the following:
68 Matrox Extio 3 Series – User Guide
Fixed EDID
.
 Digital audio to displays with speakers – Make sure the host systems are using the
video output of the graphics card as the destination for the sound.
 Digital audio to analog (
a Receiver, then go to the
and
audio source Line Out audio source
 Analog audio (
Line In
example, from the transmitter on monitor 1, 2, 3, or 4), or if you want
Line In
to follow the mouse position.
In
option is enabled. Aggregator mode is supported only with
or
Headphone Line Out
page. Make sure you select the proper
Audio
for the
) – Verify where the
Line In
or ).
LAN1 LAN2
) – In Extio Central Manager, select
Headphone
of the transmitter unit.
Video In
you want is coming from (for
Line