Description of supported connections
Connector
12V d.c. 5A power
Video In
Video Out
Headphone
LAN1
LAN2
Line In
Line Out
Microphone
RS232
USB 2.0
38 Matrox Extio 3 Series – User Guide
Description
Connect the12V d.c. 5A power supply included with your product
to this connector.
Connect your video source (graphics hardware) to this connector.
Connect a digital monitor to this connector.
Connect your headphones to this connector. This connector
supports a 3.5 mm stereo jack. While headphones are connected,
the
connector remains enabled.
Line Out
Connect an RJ45 cable to this connector.
Note:
If you're using link redundancy, make sure the
connectors are connected before enabling the
LAN2
feature.
redundancy
Connect an SFP module (RJ45 cable or LC-LC fiber optic cable)
to this connector. For more information,
module", page
Note:
If you're using link redundancy, make sure the
connectors are connected before enabling the
LAN2
feature.
redundancy
Connect the
Line Out
another audio device (local or remote) to this connector. This
connector supports a 3.5 mm stereo jack.
Connect the
Line In
another audio device (local or remote) to this connector. This
connector supports a 3.5 mm stereo jack.
Connect your microphone to this connector. This connector
supports a 3.5 mm stereo jack.
Control an RS232 device on one of your devices with an RS232
controller connected to device, or with an RS232 controller
sending commands over the network.
If your RS232 device has a DB25 connector, use a DE9 (also
known as a DB9) to DB25 converter to connect your device to this
connector.
Connect a USB device to this connector. Note: When the
local console on the transmitter
Manager
Transmitter settings
console), only keyboard and mouse can be connected to the front
USB connectors on a transmitter device.
39.
connector of your computer (host) or of
connector of your computer (host) or of
option is enabled (Extio Central
and
LAN1
Link
see "Installing the SFP
and
LAN1
Link
Enable
More options
Local