Environmental; Notes; Fiber Optic Transceiver Sfp (Small Form Factor Pluggable) Modules; Battery - Matrox Extio 3 Series User Manual

Environmental

Temperature, operational
Temperature, non-operational
storage and transportation
Humidity, operational (indoor)
Humidity, non-operational storage
and transportation
Atmospheric pressure, operational
Atmospheric pressure,
non-operational and transportation

Notes

When using a touch screen monitor, make sure your monitor is set as the main display

in Windows.
Link redundancy – After disabling link redundancy and unplugging the RJ45 cable, the

receiver unit switches back to SFP.
Fiber optic transceiver SFP (Small Form Factor Pluggable)
modules
When optical SFP modules are used, Extio 3 products are certified for safety only when operated with
SFP modules purchased through Matrox, with the part number XTO3-SFPMM for multi-mode, or
part number XTO3-SFPSM for single-mode SFP modules.

Battery

Non-replaceable battery: To dispose of your product, see www.matrox.com/environment/weee.
Caution: There is a risk of explosion if the battery is replaced by an incorrect type. This
product contains no user-serviceable parts inside.
Battery:
Used to maintain the time and date settings for the product.

 Chemistry: Lithium Manganese Dioxide (Li/MnO2)
Capacity: 225mAh

94 Matrox Extio 3 Series – User Guide
Operating: 0 to 45 ºC (32 to 104 ºF)
-40 to 70 ºC (-40 to 158 ºF)
20 to 80% (non-condensing)
5% to 95% (non-condensing)
660hPa (3,000 meters / 9,842 feet)
to 1013hPa (0 meters / 0 feet)
192hPa (12,000 meters / 39,370 feet)
to 1020hPa (-50 meters / -164 feet)